Seat Concepts KTM (2016) SX/XCF (2017-19) XCW/EXC-F (2017-18) SX/SXF/XCF/XC *Element XL*

Width: 8.5"

Height: Same as OEM

Details:
 An Element seat is an ultimate tool for any off-road enthusiast. Whether you're an aggressive rider looking to get more traction along with unmatched comfort or fighting off a waterlogged seat in the summer and an ice block in the winter. The Element seat comes with four traction ribs at the rear to keep you firmly planted in the cockpit comprised entirely of our gripper material. Secondly, each Element seat comes seam sealed from the inside to prevent water from penetrating into the foam. We don't stop there, before the cover is installed each foam is covered with a thin water barrier as added protection from the elements.

Rain...Snow...Mud or anywhere in between the Element seat is a must have for year-round use.

-This new XL seat design is wider than our standard comfort seat.  It is wider at the widest point. This means more surface area, better weight distribution, and added comfort for those not worried about seat width.

The XL is 8 1/2 inches wide and our standard comfort is 7 1/8 inches wide.

-Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

------------------------------------------------------------------
PLEASE VERIFY FITMENT USING THE LIST BELOW OR USING "MY GARAGE" AND SELECTING YOUR VEHICLE BEFORE PURCHASING THIS SEAT.  PLEASE CALL US IF YOU HAVE ANY QUESTIONS PRIOR TO MAKING YOUR PURCHASE
------------------------------------------------------------------

Fits Years/Models:
2015 450SX Factory Edition
2016 SX 125
2016 SXF 250, SXF 350, SXF 450
2016 XCF 250, XCF 350, XCF 450
2017 SX 125, SX 150, SX 250
2017 SXF 250, SXF 350, SXF 450
2017 XC 300
2017 XC-W 150, XC-W 250, XC-W 300
2017 EXC-F 250, EXC-F 350, EXC-F 500
2017 XC-F 250 XC-F 350, XC-F 450
2018 SX 125, SX 250
2018 SXF 250, SXF 350
2018 XC 300
2018 XC-W 150, XC-W 250, XC-W 300
2018 EXC-F 250, EXC-F 350, EXC-F 500
2018 XC-W TPI 250
2019 EXC-F 350, EXC-F 450, EXC-F 500
2019 XC-W TPI 250, XC-W TPI 300
2019 XC-W 150

WILL NOT FIT:
2018 450SX-F Factory Edition

For the Six Days color scheme click HERE

Important Information:
Per OEM specifications, the seat bolts should be tightened NO MORE than 7 ft/lbs to prevent tightening or stripping.  Over tightening can cause a failure.  Cross threading can also be an issue and should be avoided.  DO NOT use air tools to tighten seat bolts as it can cause them to be stripped.