REV'IT! Dominator 3 GTX Jacket

Laminated and ventilated GORE-TEX jacket for the most demanding adventure rider!

It’s a daunting task when trying to improve upon the pinnacle motorcycle jacket of our adventure collection, but we made it happen. The Dominator 3 GTX motorcycle jacket has enhanced ventilation, waterproofing, and refinements to every element of the construction to upgrade performance and comfort for the rider. The fully waterproof motorcycle jacket features the tried and tested 3L GORE-TEX laminate with an updated, clean design. The detachable storm collar - which protects the neck of the rider against the elements - can be stored in the back pocket when not needed.

The stretch cuffs are also detachable and will block cold air trying to flow into the sleeves of the motorcycle jacket. In higher temperatures, airflow to the body is improved by redesigned VCS|Zippers at the upper and lower arms while our patented VCS|Aquadefence panels on the chest cool down the upper body. The 3L GORE-TEX Pro reinforced Armacor fabric is used on the shoulders for extra abrasion resistance and durability. Protection is solidified by our award-winning SEEFLEX CE-level 2 armor at the shoulders and elbows and the SEESOFT CE-level 2 back protector. The motorcycle jacket is prepared for our SEESOFT CE-level 1 divided chest protectors. The detachable kidney belt provides stability and protection to the lower back area.

Go ahead, travel anywhere, anytime with the Dominator GTX motorcycle jacket. Your next adventure awaits.

Fit:

• Regular fit
  The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.

Comfort Features: 

• Adjustability
• Adjustable elbow protection
  The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.
• Adjustment strap at lower arm
• Adjustment tab at cuffs
• Adjustment zippers at side seam
• Double adjustment strap at waist
• Elasticated upper arm
• Flexisnap at collar
  The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.
  
  

Pockets:

• Hand warmer pockets
• Inner napoleon pocket
• Secret inner pocket
• Sleeve pocket
• Two inner pockets
• Two waterproof stash pockets at waist
• Waterproof stash pocket on back

Lining:

• 3D mesh
• Mesh

Features:

• Adjustable protector pockets
• Detachable kidney belt
  The kidney belt provides stability and protection to the lower back area. This garment comes standard equipped with a detachable kidney belt which can be easily attached to the jacket with a strong Velcro connection.
• Detachable storm collar
• External hang loop
• Long connection zipper
• Prepared for vest connector NEON
  The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.
• Removable stretch cuffs
• Short connection zipper
• Soft edge at collar
  For extra comfort, the inside of the collar is covered with a soft fabric.
• Stretch at armholes
• Stretch at back
• Two-way Collar Snap Closure System

Climate Regulation: 

Ventilation:

• Aquadefence panels on upper front
  When opened the Aquadefence system allows direct ventilation to the body. When the zipper or panel is closed, it presses onto the incorporated rain gutter, the jacket is then 100% wind- and waterproof.  When the panel or zipper is closed the rain gutter will stop the water from entering via the ventilation holes, thereby keeping you dry and comfortable. (EU patent EP 2574249, US patent US 13/630.520)
• Aquadefence zippers at waist
  When opened the aquadefence system allows direct ventilation to the body. When the zipper or panel is closed, it presses onto the incorporated rain gutter, the jacket is then 100% wind- and waterproof.  When the panel or zipper is closed the rain gutter will stop the water from entering via the ventilation holes, thereby keeping you dry and comfortable. (EU patent EP 2574249, US patent US 13/630.520)
• VCS|Panel with FidLock® magnetic fastener
  Removable panels for optimum ventilation. Ventilation is nice on warmer days, but not as desirable in cold weather. The panels can be kept open due to the FidLock magnetic Fastener. The Fidlock® magnetic fastener not only uses the attraction but also the repulsion of magnets. This leads to a robust closure with high locking strength that can still be easily opened with one hand while riding.
• Zippers on lower arms
• Zippers on upper arms
• Zipper at upper back

Protection:

• 3D mesh protector pockets
• Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
  Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
• Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
  The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
• Protective print at elbows
• Protective print at shoulders
• Safety seams
  The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
• SEEFLEX CE-level 2 Elbow Protectors
  Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
• SEEFLEX CE-level 2 Shoulder Protectors
  Certified CE-Level 2 according to the new norm EN1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.
• SEESOFT CE-level 2 Back Protector
  The SEESOFT CE-Level 2 back protector insert is designed to absorb variable impacts without compromising on comfort, ventilation or freedom of movement.
• Thumb loops

Visibility:

• Laminated reflection on back
  Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
• Laminated reflection at chest
  Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflection at collar
  Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflection at upper arms
  Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Wash & Care: 

Outershell:

• Machine wash 30°C, mild cycle 
• Do NOT bleach 
• tumble dry possible, max 60°C/lower temperature 
• Do NOT iron
• Do NOT dry clean

Warnings:

• Do NOT use softener 
• Fasten closures before use / cleaning
• Refer to the user manual 
• Wash separately 
• Hang to dry then tumble dry for 20 minutes to reactivate the DWR of a GORE-TEX garment 
• Remove protectors before cleaning