Kriega Trident 660 Fit Kit

The kit consists of high quality hypalon & nylon webbing loops, that easily fit under the seat using the existing mounting locations.

Once fitted, they provide strong hook-on points for any Kriega US-Drypack or US-Drypack Combo.

Pack Contents

• 2 x 80mm bolt-on loops
• 2 X 65mm bolt-on loops
• 2 x M5 washers
• 2 x M6 washers
• 2 x 25mm M5 bolts

Fitting

1. Slide an M6 washer inside each hypalon end of the 80mm bolt-on loops. 
2. Unscrew the seat strap bolts, add the bolt-on loops and reattach, as illustrated.
3. Slide an M5 washer inside each hypalon end of the 65mm bolt-on loops. 
4. Unscrew the two rear M5 panel bolts, keep the M5 washers but replace the bolts with the new 25mm bolts. 
5. Add the bolt-on loops and reattach, as illustrated.

WEIGHT

• 20g