REV'IT! Morocco jacket

Old-school rally raid vibes and a whole lot of Pol Tarrés cool: Meet the Morocco jacket. An off-road jacket only, the Morocco is dedicated and fit for purpose. And that purpose is sending it off-road in rally-raid adventures and very much looking the part as you go.

A firm dose of vintage-cool style:

Developed in close relation with Pol himself, the Morocco jacket was based directly on feedback and input. Taking inspiration from his – very successful – Africa Eco Race rally-raid outings, combined with a firm dose of the Pol’s preferred vintage cool style, this is a rally-raid ready jacket for the masses. The entirely soft-shell stretch front and back offers amazing performance thanks to the 3L lamination of the material and the stretch properties making the Morocco ready for long days standing on the pegs off road. It’s the kind of comfort you need on the edge between grip and slip in the dirt.

For long days standing on the pegs:

To that end, the outspoken red-feather grey Morocco jacket is prepared with lots of on-board storage options. Whether you just need a hydrapak on board, or everything up to bars and gels, spare gloves, and even an emergency rain layer, there’s room to rival a backpack.

Purposeful, purely off-road jacket:

Mind you, the purposeful design of the Morocco jacket makes it a purely off-road jacket. Intended to be worn with a separate protection vest only, there’s no integrated impact protection. At the same time, the jacket’s CE-rated construction is made to take a beating and boasts a B class safety rating for abrasion.

FEATURES:

• Laminated reflection at chest: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Laminated reflection at upper arms: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
• Pockets:
  • Inner pocket.
  • Slit pocket at back. 
  • A slit pocket at the lower back allows for easily accessible storage of personals where it doesn't interfere with the rider.
  • Two pockets on front.
  • Two back pockets on back.
  • Chest pocket.
  • Internal chest pocket.
• The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
• The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.
• For extra comfort, the inside of the collar is covered with a soft fabric.
• Adjustment drawcord at hem.
• Outer PWR Shell
• Ventilation:  Zippers on chest and zippers at back.
• Protection Inserts: Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

• Wash and Care:

  • Machine wash 30°C, mild cycle
  • Do not bleach
  • Do not tumble dry
  • Do not iron
  • Do not dry clean
  • Remove protectors before cleaning