JABSCO RULE Ballast King DC Flexible Impeller Pump

Ballast king dc flexible impeller pump coupled to a 12 Volt DC Motor. The motor on this pump comes with a Deutsch connector, and does NOT include the Reversing Polarity Switch. This is the higher flow version of the Ballast Puppy. Featuring a larger motor, the Ballast King will pump up to 15 GPM (57 LPM), which will add up to 125 pounds of ballast water per minute. It's reversible, so it can both empty and fill ballast tanks. It's self-priming and the impeller is run dry. Only the model 22610-9507 has a Reversing Polarity Switch that is part of the motor. Maximum ambient temperature is 60 degrees C (140 degrees F), with minimum temperature - 15 degrees C (5 degrees F). The pump should be installed so that the motor is protected from constant rain, wash down or bilge water. The pump should not be run with a closed outlet. The pump body can be turned 180 degrees in relation to the motor. This will change the flow direction. Only use the pump with specified products, including fresh and salt water solutions.

Do not use any Jabsco pump for petrol, petroleum products or any products with a flash point below 37 deg. C,

Specifications:

✔Ballast King DC Flexible Impeller Pump and Motor unit with Deutsch connector
✔ Pump is Close Coupled to a 12 Volt DC Motor
✔ Ballast King adds approximately 125 pounds of ballast water per minute
✔ Ballast King is self-priming to 4' (1.2m)
✔ Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected)
✔ Ports are 1 Inch hose barb and 1/2 Inch BSP internal Threaded